Overview: siluoer19030 is an amide-modified special fluorinated polymer characterized by a very fine average particle size. When used in powder coatings, due to its incompatibility with the base resin, it can produce a uniform sanding effect on the coating film, and with other properties of the coating, it is an ideal art additive.

Typical physical properties: white powder or floc ; Apparent density: 1.10 - 1.30g / cm3 ; Particle size: 20-30um ; Melting point : 320 ° C

Characteristics and uses:

Powder coatings for any system, such as pure epoxy, epoxy/polyester, polyester/TGIC or HAA and PU, give the coating a uniform fine sand-like appearance.

1. The texture of the coating is more pronounced and stable than the texture additives currently used.

2. The size of the coating sand is related to the amount of siluoe19030, the size of the powder, and the thickness of the coating. Siluoer19030 dosage is small, the powder size is large

Scope of application:

Applicable to sandstone appearance coatings for household appliances, IT equipment, audio equipment, office supplies, sports equipment and other industrial equipment

Add amount:

It is mixed with other components in the formulation in a high speed mixer and then extruded through an extruder. The dosage is 0.05 -0.5% of the total weight of the formula

safety certificate:

Siluoer series of Texture Preparation has been tested for environmental safety and safety, and it is safe and meets the latest EU environmental protection requirements.

Storage:

Non-dangerous goods, can be stored for 24 months at room temperature after drying. Please keep them well when not used.